Products
.jpg)
Plug-in type electromagnetic flowmeter
1.Brief introduction
F E M I plug-in type electromagnetic flowmeter is new type flowmeter developed based on pipeline electromagnetic flowmeter.
2.Technical index
pipe diameter
300～3000mm
flow rate
0.1～10m/s
accuracy
0.5～10m/s: ±1.5％FS; 0.1～0.5m/s: ±2.0％FS
0.1～10m/s: ±2.5％FS
output
4～20mAcurrent output;
communication protocol
RS485.HARTcommunication protocol.MODBUS protocol
specific conductance
＞5μs/cm
straight pipe
befor 5DN, after3DN
medium temperature
-20°C～/+130°C
environment temperature
-20°C～/+60°C
pressure resistance
1.6MPa
level of protection
IP65(integrated ); IP68(split)
electrode material
316L stainless steel
output signal
4-20mA; RS485; HART; MODBUS
material of sensor
stainless steel
power supply
220VAC
power
6.5W
level of pressure resistance
≤1.6MPa
1.Brief introduction
F E M I plug-in type electromagnetic flowmeter is new type flowmeter developed based on pipeline electromagnetic flowmeter.
2.Technical index| pipe diameter | 300～3000mm |
| flow rate | 0.1～10m/s |
| accuracy | 0.5～10m/s: ±1.5％FS; 0.1～0.5m/s: ±2.0％FS |
| 0.1～10m/s: ±2.5％FS | |
| output | 4～20mAcurrent output; |
| communication protocol | RS485.HARTcommunication protocol.MODBUS protocol |
| specific conductance | ＞5μs/cm |
| straight pipe | befor 5DN, after3DN |
| medium temperature | -20°C～/+130°C |
| environment temperature | -20°C～/+60°C |
| pressure resistance | 1.6MPa |
| level of protection | IP65(integrated ); IP68(split) |
| electrode material | 316L stainless steel |
| output signal | 4-20mA; RS485; HART; MODBUS |
| material of sensor | stainless steel |
| power supply | 220VAC |
| power | 6.5W |
| level of pressure resistance |
≤1.6MPa |
| 【LAST ONE】 【NEXT ONE】 【BACK】 |
